100MT MAIDEN GALLIUM MINERAL RESOURCE ESTIMATE
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
ASX: AXL
22 August 2025
100Mt Maiden Gallium Inferred Mineral Resource Estimate
at Caladão Project – Area A
100Mt @ 42ppm Ga at a 35ppm cut off
100Mt Gallium Mineral Resource Estimate
•
•
•
•
•
•
•
•
Maiden JORC (2012) Gallium Inferred Mineral Resource Estimate (MRE) of 100Mt @ 42ppm Ga (4.2kt
contained Gallium metal) at Area A, in the lateritic soils using 35ppm Ga cutoff
MRE delineated from surface and limited to the lateritic cover averaging ~10m depth
Initial MRE at Area A covers ~33km2 mineralised gallium zone
Area B with additional 58km2 mineralised zone to be incorporated with significant additional MRE
expansion potential
Gallium is classified as a critical mineral with defence and strategic significance by both the US
and the EU as essential for various defence applications as a key compound in military grade
electronics, semiconductors, radar and satellites, high frequency communication systems and
infra red optics
China supplies ~94% of world Gallium and on 3 December 2024, China placed a total export ban on
gallium and other critical minerals
Gallium has a current market price of approximately US$385,000 per ton (Ga 7N purity)
Axel’s Gallium MRE represents Brazil’s first and one of few in-situ Gallium discoveries worldwide
that is not associated with alumina or bauxite processing
Caladão REE-Gallium Project
•
•
•
•
Caladão Project is strategically located in Brazil’s Lithium Valley, a Tier 1 jurisdiction with worldclass infrastructure and mining ecosystem including low-cost power, sealed highways and close
proximity to existing mining hubs and ports
Project covers ~430km2 with only 20% mineralised area drilled to date for both Gallium and REE
Additional REE MRE near completion
Ongoing test work underway to develop low-cost recovery processes for REE and Gallium
Non-Executive Chairman, Paul Dickson, commented:
“The exceptional Maiden gallium Resource we have defined at Caladão is unique, with
its own discrete layer of mineralisation at surface. We started our first drill campaign in
August 2024, only a month after listing on the ASX and identified the gallium layer in
December 2024 following a review of the assays from this phase of drilling. To deliver a
world-class gallium MRE has been the result of a lot of hard work from the Axel team and
we thank them for their tireless efforts.
ASX : AXL | FSE: HN8
ACN: 665 921 273
832 High St
Kew East VIC
Australia 3102
www.axelreelimited.com.au
info@axelreelimited.com.au
The scale already defined in Area A establishes Caladão as a standout gallium deposit,
the first in Brazil that we can identify, and one of the world’s largest gallium deposits,
placing us well ahead of our critical metals peers.
Incredibly, this is before factoring in the upside from Area B, where results to date
indicate similar, if not superior, potential as Area A. We are confident that the maiden
gallium MRE from Area B will expand an already world-class resource base.
We have only completed drilling across ~20% of the mineralised area at our Caladão
Project, so we remain very optimistic that this is only the beginning of a globally
significant deposit.
The continually growing size provides a point of difference for Axel and demonstrates our
emergence as a potential leader in the discovery and development of strategic metals
essential for the clean energy transition.”
Axel REE Limited (ASX: AXL, FSE:HN8, “Axel” or “the Company”) is pleased to announce its maiden Mineral
Resource Estimate (MRE) for Gallium (Table 1,2), completed by SRK Consulting (Brazil) (SRK), at the Caladão
REE-Gallium Project in Minas Gerais, Brazil. At a 35ppm Ga cut off, the MRE stands at 100Mt @ 42ppm Ga.
The size of the MRE makes Axel host one of the largest non-alumina/bauxite gallium deposits in the
world.
About the Caladão REE-Gallium Project
The Caladão REE-Gallium Project is Axel REE’s flagship clay‐hosted rare earths and gallium project in the
Lithium Valley of Minas Gerais, Brazil. The tenure covers ~430 km² across two priority targets, Area A and
Area B. Drilling and sampling to date have outlined a mineralised footprint of ~65 km², representing ~20% of
the Project area, with consistent near-surface REE and gallium grades across both areas. Initial test work by
ANSTO has confirmed ionic adsorption clay REE that desorb under ammonium sulfate and NaCl leach
conditions, with additional acid-leach tests indicating gallium recoverability.
SRK Consulting has determined a Maiden Inferred Gallium Mineral Resource Estimate and is progressing a
maiden Mineral Resource Estimate for REE.
Caladão is positioned within an established critical minerals district that hosts operating and advanced
lithium projects, including Sigma Lithium’s Grota do Cirilo operation near Araçuai/Itinga, Atlas Lithium’s
Minas Gerais (Salinas) projects, and Pilbara Minerals Limited’s (ASX:PLS) Colina deposit, benefitting from
the region’s power, road and services infrastructure developed for battery-materials supply chains.
The project’s scale, dual commodity endowment and district location provide a strategic platform for
continued resource definition and metallurgical de-risking.
Global Gallium Market – Supply Critical Metal
Gallium is a versatile critical metal essential to numerous modern technologies, most notably in the
semiconductor industry where it is used to produce gallium arsenide (GaAs) and gallium nitride (GaN)
compounds. These are foundational to 5G network infrastructure, RF components for smartphones,
ASX : AXL | FSE: HN8
ACN: 665 921 273
832 High St
Kew East VIC
Australia 3102
www.axelreelimited.com.au
info@axelreelimited.com.au
advanced radar systems, high-performance LEDs, and laser diodes. Gallium is also integral to nextgeneration solar technology including high-efficiency thin-film and gallium-indium-phosphide solar cells for
aerospace and concentrated photovoltaic systems. Its role extends to power electronics in electric vehicles,
medical imaging, and even specialised medications. The semiconductor industry accounts for 40-45% of
gallium demand, telecommunications 20-25%, power devices 15-20%, green technologies 10-15%, and
aerospace technologies 5-10% 1.
China overwhelmingly dominates the global supply of gallium, controlling an estimated 94% of world
production. This status emerged through China's massive aluminum industry, where gallium is extracted
from environmentally hazardous bauxite processing streams.
Recent years have seen China weaponise its control over gallium supply. In December 2024, China initiated
export restrictions causing global spot prices to surge 2. The spot price of high-purity gallium (7N, 99.99999%)
as of 21 August 2025 stood at approximately US$366,000/ton 3, due to ongoing export controls and
geopolitical tensions.
Gallium Mineral Resource Estimate Summary
An initial global gallium Inferred Mineral Resource Estimate for the Caladão Project of 100Mt at 42ppm Ga
for 4.2kt of contained gallium, hosted in the lateritic soils, has been estimated by SRK using a cut off of
35ppm Ga (Table 1 and Table 2).
JORC
Category
Inferred
Tonnes
Mt
100
Ga
ppm
42
Ga
kt
4.21
Table 1. Gallium Global Mineral Resource Estimate at 30ppm Ga cut off at Caladão Project - Area A
JORC
Category
Cutoff
ppm Ga
Tonnes
Mt
Ga
ppm
Ga
kt
Inferred
20
135
39.37
5.32
Inferred
25
134
39.56
5.29
Inferred
30
125
40.36
5.03
Inferred
35
100
42.23
4.21
Inferred
40
55
46.15
2.54
Inferred
45
25
50.85
1.27
Table 2. Gallium Global Mineral Resource Estimate – by cut off grade
Notes:
•
•
JORC Code (2012) were followed for Mineral Resources Estimates
Mineral Resources are reported using a Ga Cut-off of 35ppm, constrained by a preliminary optimized pit shell for REE.
https://www.csis.org/analysis/beyond-rare-earths-chinas-growing-threat-gallium-supply-chains#h2-gallium-s-strategic-significance
https://www.reuters.com/markets/commodities/china-bans-exports-gallium-germanium-antimony-us-2024-12-03/
3
https://www.metal.com/en/markets/17
1
2
ASX : AXL | FSE: HN8
ACN: 665 921 273
832 High St
Kew East VIC
Australia 3102
www.axelreelimited.com.au
info@axelreelimited.com.au
•
•
•
•
•
•
The Mineral Resources statement has been prepared by Marcelo Antônio Batelochi, MAusIMM (CP), SRK Associate
Consultant, who is Competent Person.
Mineral Resources that are not Mineral Reserves do not have demonstrated economic viability.
Totals may not balance due to rounding of figures.
The estimate of Mineral Resources may be materially affected by environmental, permitting, legal, title, taxation, sociopolitical, marketing, or other relevant factors.
Mineral resources were classified as Inferred.
Below are the RPEEE constrain for the first scenario for the pit envelope related to the REE which contains the declared
MRE for gallium.
The results are presented in-situ and undiluted, are constrained within a preliminary optimized open pit shell for REE, and
are considered to have reasonable prospects of economic viability.
Sensibility Analysis Gallium - Caladão Area A
Ga (ppm)
70.0
140.0
60.0
120.0
50.0
100.0
40.0
80.0
30.0
60.0
20.0
40.0
Ga_ppm
Mass_Mt
10.0
Mass (Mt)
•
20.0
0.0
0.0
0
10
15
20
25
30
35
40
45
50
55
60
Ga CoG (ppm)
Figure 1. Gallium cut off grade vs tonnage
Caladão Project – REE Resource Assessment Update
SRK is currently finalising its assessment of the Caladão Project to determine an Inferred Mineral Resource
Estimate for REE in accordance with the JORC Code (2012). The full details of the REE Mineral Resource
Estimate will be released once SRK has completed its assessment, which is expected in the coming weeks.
Gallium MRE – Further Information
The gallium mineralisation in the lateritic soils and in the saprolite above horizon rich in rare earths, located
at Padre Paraiso, Minas Gerais State, Brazil. It is the first gallium mineralisation project in Brazil. The Caladão
Area A project is divided in the Central and East sectors. The Caladão project is situated within the Eastern
Brazilian Pegmatite Province (EBP), commonly known as the ‘Lithium Valley’, specifically in the G5
supersuite (Padre Paraíso Charnockite and Caladão granite).
ASX : AXL | FSE: HN8
ACN: 665 921 273
832 High St
Kew East VIC
Australia 3102
www.axelreelimited.com.au
info@axelreelimited.com.au
The project area is characterized by a tropical climate, with vegetation comprising low grasses and remnant
patches of tropical forest. The local economy has been supported by agriculture and livestock. In addition,
the region hosts active artisanal mining operations ('garimpos') for gemstones such as topaz and
aquamarine.
The project is located approximately 543 km from Belo Horizonte, the capital of Minas Gerais State. The area
can be accessed by road via highways BR-381 and BR-116. Alternatively, the site can be reached by air to the
Governador Valadares airport, followed by 236 km on BR-116 to the municipality of Padre Paraíso. There are
also non-regular commercial flights to the city of Teófilo Otoni, located approximately 100 km from Padre
Paraíso (Figure 3).
Figure 2. Caladão location and access map.
Local Geology
The Caladão Project is situated within a region predominately felsic to intermediate intrusive post-collisional
magmatic rocks associated with the Araçuaí Orogen. The mineral rights cover lithologies primarily
associated with the Caladão Granite, Padre Paraíso Charnockite, and Faísca Leucogranite, all of which
belong to the G5 suite. These rocks are characterized by high-K calc-alkaline affinity and metaluminous to
slightly peraluminous compositions.
ASX : AXL | FSE: HN8
ACN: 665 921 273
832 High St
Kew East VIC
Australia 3102
www.axelreelimited.com.au
info@axelreelimited.com.au
The Caladão Granite, which hosts the majority of the known mineralisation, is predominantly composed of
biotite monzogranite to syenogranite, often exhibiting porphyritic textures and moderate to strong foliation
in localized zones. The unit is intruded by subordinate granodiorite, quartz monzodiorite, and minor
charnockitic facies. These intrusive bodies commonly show evidence of late-stage magmatic differentiation,
including pegmatitic zones and accessory minerals of economic interest.
To better characterize the local geology and its mineralogical variations, Axel conducted a petrographic
study of nine drill core samples in partnership with the company Petrotek. The samples were described using
both macroscopic and microscopic data, employing a ZEISS AxioScope 40 petrographic microscope
equipped with transmitted light and a photographic camera. Special attention was given to identify the
presence or absence of rare earth element-bearing minerals.
The following rock types were described: Biotite Syenogranite; Porphyritic Biotite Syenogranite; Porphyritic
Hornblende-Biotite-Allanite Monzogranite; Hornblende-Biotite Quartz Monzodiorite; Porphyritic Ilmenite
Monzogranite; Granodiorite; Biotite Monzogranite.
The allanite mineral which has rare earth elements in its chemical structure was identified as an accessory
mineral typically found alongside mafic and opaque minerals in all analyzed samples.
Mineralisation
The gallium mineralisation style at the Caladão project is mainly a supergenic enrichment in the lateritic soils
following the iron hydroxide enrichment trend, the higher grades are closed to surface, immediately above
the Clay-hosted Rare Earth Element (REE) with an Ionic Absorption Clay (IAC) component in the saprock. The
weathering process promoted the breakdown and chemical alteration of REE-bearing primary minerals,
facilitating the mobilization and subsequent adsorption of REEs onto the surfaces of secondary mineral.
The host rocks of the Caladão Project—including syenogranites, monzogranites, and quartz
monzodiorites—contain allanite, an REE-rich accessory mineral. During prolonged weathering, allanite and
other primary minerals undergo alteration and decomposition, releasing REEs into the soil profile.
The minerals are broken by the weathering process and the REE are adsorbed onto aluminosilicates and
could also be distributed onto Fe and Mn oxides or in organic fractions, being substituted by K+ or Ca2+. The
mainly clay minerals that adsorbed the REE are the phyllosilicates including:
•
•
•
kaolinite [Al2Si2O5(OH)4],
halloysite [Al(OH)6Si2O5(OH)3] and
muscovite [KAl2(AlSi3O10)(OH)2] and iron and aluminium oxides.
These minerals are developed in lateritic weathering profiles, particularly within latosols, which are typical
of deeply weathered tropical terrains.
In addition to REEs, elevated concentrations of gallium have been identified in the lateritic zones of the
project area. Gallium, often associated with aluminum-rich minerals in bauxitic and lateritic environments,
does represent a potential by-product opportunity depending on its concentration and metallurgical
recoverability.
ASX : AXL | FSE: HN8
ACN: 665 921 273
832 High St
Kew East VIC
Australia 3102
www.axelreelimited.com.au
info@axelreelimited.com.au
In terms of geology and mineralisation style, these characteristics position the Caladão Project within the
category of a critical metal target with a potential to be extracted by a low-impact technologies.
Drilling
The Drilling activities conducted between 2023 and 2025 at the Caladão Project are summarized in Table 3.
The dataset includes a total of 211 drillholes, 3,896.72 meters of drilling in three drilling methods: auger
drilling, channel sampling, and diamond drilling. Figure 4. presents a base map of the spatial distribution of
the drillholes by drilling method, illustrating the overall coverage and targeting strategy implemented across
the project area.
Project Drilling Type
Auger
Channel
Diamond Drillhole
Total
Year
2023 to 2025
2024
2024
Nº Holes
165
10
36
211
Length (m)
2,084.2
295
1517.52
3,896.72
Table 3. Summary of completed drilling at the Caladão Project
ASX : AXL | FSE: HN8
ACN: 665 921 273
832 High St
Kew East VIC
Australia 3102
www.axelreelimited.com.au
info@axelreelimited.com.au
Figure 3 - Map showing the channels, auger and diamond drillings in the central and east area A of Caladão
Project.
The assay database comprises a total of 3,595 sample results. Auger samples range between 1 and 2 meters
in length. Diamond drill core samples are approximately 1 meter in length, with all diamond drillholes
completed using HQ-diameter core and drilled vertically. Channel samples are up to 5 meters in length,
collected in sub-horizontal orientations on access cuts, designed to intercept approximately 1 to 2 meters
perpendicular to the weathering profile
The objective of the drillhole collar survey was to ensure accurate geodetic positioning for all drillhole
locations. The survey was conducted by Novatopo Serviços de Engenharia, Topografia e Hidrografia Ltda.,
utilizing relative geodesic GNSS method to determine the geodetic coordinates of the drillholes. The
acquired data were referenced to one of the network control points (Local datum) established for the project,
employing both static and RTK (Real-Time Kinematic) GNSS tracking techniques. For each surveyed geodetic
point, a detailed log was prepared. These logs included the geodetic and UTM coordinates (SIRGAS-2000),
ellipsoidal and orthometric heights, two photographs, a location map, and sufficient descriptive elements
to ensure precise identification of each landmark.
Density
ASX : AXL | FSE: HN8
ACN: 665 921 273
832 High St
Kew East VIC
Australia 3102
www.axelreelimited.com.au
info@axelreelimited.com.au
The objective of the density measurements at Caladão Project was to obtain the dry bulk density of materials
across different weathering domains from diamond drill core samples.
The density database comprises 44 samples analyzed internally by Axel’s geological team at the core shed,
of which 37 were also independently analyzed by SGS Geosol Laboratory for comparison and validation
purposes. All density determinations were conducted on core samples from diamond drill holes (DDH), with
individual sample lengths ranging from 0.20 to 0.30 meters.
Samples were collected from four distinct weathering domains: LTS (Lateritic Saprolite), MTZ (Moderately
Weathered Zone), USAP (Upper Saprolite), and LSAP (Lower Saprolite). Axel utilized the water volume
displacement method to determine density, which, in summary, entails submerging the sample in a fluid of
known volume and measuring the change in liquid level. This displacement corresponds to the volume of
the irregular solid, allowing for the calculation of density using the mass-to-volume ratio.
Sample Preparation and Chemical Analysis
The project carried out three sampling campaigns, with all samples assayed at the SGS Geosol laboratory.
In addition, a batch of samples for interlaboratory check analysis were sent to the ALS laboratory. The Table
4 summarizes the information for the campaigns.
Campaign
SGS_2023
SGS_2024
SGS_2025
Total:
Year
2023
2024
2025
-
Laboratory
SGS Geosol
SGS Geosol
SGS Geosol
-
N. Total of Samples
152
2,449
796
3,397
Table 4 - Summary of sampling campaigns
Analytical Methods
The objective of these analytical procedures was to determine accurately the concentration of major, minor,
and trace elements, in particular the rare earth elements (REE) and gallium, through certified laboratory
methods.
Following physical preparation, the geochemical analysis of the samples at SGS Geosol laboratory started
with sample decomposition via sodium peroxide fusion in a muffle furnace. The resulting melt was dissolved
in an acid solution, effectively breaking down the mineral matrix and rendering most elements into a soluble
form for analysis.
The dissolved samples were analyzed using two techniques: Inductively Coupled Plasma Mass
Spectrometry (ICP-MS) and Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES).
ICP-MS was employed for the analysis of REEs and gallium due to its superior detection limits, making it
more adequate for trace element quantification. This method measures the mass-to-charge ratio of ions in
solution and applies necessary corrections by referencing calibrated standards. Instrument calibration and
data validation were performed under operator supervision.
ASX : AXL | FSE: HN8
ACN: 665 921 273
832 High St
Kew East VIC
Australia 3102
www.axelreelimited.com.au
info@axelreelimited.com.au
ICP-OES was used for the analysis of major elements. This technique measures the characteristic
wavelengths of light emitted by elements when excited in a plasma source. As with ICP-MS, the operator is
responsible for real-time monitoring and result validation.
Both ICP-MS and ICP-OES analyses were conducted on all samples sent to the SGS Lab. The laboratory
routinely compared and validated results from both techniques and selected the most accurate and reliable
values for reporting to the client.
In addition to the work performed at SGS Geosol, ALS Laboratory also conducted multi-element analysis
using sodium peroxide fusion with an ICP finish, in accordance with comparable analytical protocols.
Quality Assurance and Quality Control of Analytical Results (QAQC)
The QAQC program aims to ensure the quality, reliability and trustworthiness of the exploration data. Quality
assurance (QA) activities were conducted in accordance with Axel’s written field procedures and included
independent verifications of aspects such as drilling, surveying, sampling, and assaying. Quality control
(QC) is verified through the results analysis, data management, and database integrity.
QC control samples provide statistical information about the precision and accuracy reported by the
laboratory. Certified Reference Materials (CRMs) are used to assess accuracy and identify any potential bias
in the process. Duplicate samples indicate the level of precision of the analyses, while blank control
samples reveal potential contamination during sample preparation or analysis. These controls are also
important for preventing sample mix-ups and monitoring both voluntary and inadvertent contamination.
SRK reviewed the quality assurance procedures implemented by Axel and SGS Geosol laboratory. The
operational activities conducted in the field and at the core shed, were properly executed and consistent
with industry good practices.
Quality Control (QC) at Axel is based on the insertion of blind control samples into the sample batches sent
for preparation and analysis, as well as inter-laboratory checks between the primary laboratory (SGS
Geosol) and a secondary laboratory (ALS).
Besides the Axel’s blind control samples, the SGS laboratory control samples were verified through the SGS
internal QAQC report (October – 2024 until April-2025).
Metallurgical Factors and Assumptions
The Caladão Project – Area A consists of an area of rare earth elements reaching at some points up to
7,612ppm of TREO and widespread gallium mineralisation with high grades in the lateritic horizon.
The drilling campaign carried out in the Phase 1 Drilling Program revealed an area with significant potential
for rare earths and gallium, showing points with high levels of rare earths present in clay minerals.
As part of the plan to assess the potential of this mineralisation, tests were carried out as part of a work
program to assess the content of rare earths that could be desorbed under standard ionic desorption
conditions in selected samples and for gallium recovery. This testing program was carried out at the ANSTOAustralia facilities (ASX : 30 July 2025).
ASX : AXL | FSE: HN8
ACN: 665 921 273
832 High St
Kew East VIC
Australia 3102
www.axelreelimited.com.au
info@axelreelimited.com.au
In this phase, 39 drill hole samples consisting of 3m -long intervals were evaluated for chemical analysis and
diagnostic leaching tests (desorption). The 39 samples were subjected to desorption tests with ammonium
sulphate solution under standard conditions (pH=4). From the results obtained, 4 samples were selected for
further testing with ammonium sulphate at a more acidic pH to assess the impact of acidity on rare earth
extraction. In addition to these, 3 tests were also carried out to assess gallium recovery.
These 39 samples were from 2 drill holes, 14 from hole CLD-DDH-018 (from 2 to 44m), and 25 samples from
hole CLD-DDH-036 (from 2 to 77m). The drill hole samples correspond to intervals of every three meters.
Since the overburden contains anomalous values of gallium, its economic recovery has the potential to
offset stripping costs. To assess the potential for gallium recovery, three additional near-surface samples
were selected for testing at ANSTO. (Refer ASX announcement dated 25 07 2025)
Geological Modelling
SRK performed weathering profile 3D modelling using Leapfrog® software version 2024.1, which applies the
methodology of generating surfaces and solids implicitly, using automatic algorithms combined with user
interpretation.
In the Leapfrog project a merged table with assay, lithology, recovery and sampling information was created,
as well as some calculated data that were used for validation. In this merged table the column used to model
the domains is the REG_SEL. This coding is largely the same as Regolith of the lithology table, but with some
intervals classifications altered to improve spatial continuity.
For the Area A two geological models of the weathering zones were made; one for the Central sector and
other for the East sector.
The weathering 3D models were constructed considering the following domains:
•
•
•
Soil (SOIL); Lateritic soil (LTS); Upper Saprolite (USAP); Lower Saprolite (LSAP); Fresh Rock (FRC).
The USAP (Upper Saprolite) and LSAP (Lower Saprolite) layers, which host the higher REE
concentrations, have maximum thicknesses of 52 meters and 24 meters respectively.
The LTS (Lateritic soil) layer, which contains the higher gallium concentrations, is up to 25 meters
thick.
The SOIL domain contains the lowest REE and gallium grades.
The FRC domain has elevated REE grades but a viable characterization program to recovery the REE has not
yet been established.
The weathering profile is approximately 10 to 15 meters thick in the valleys and 15 to 75 meters on the
mountain tops. An example section showing the domaining is presented in Figure 6 (a 3x vertical
exaggeration has been applied to the top figure).
ASX : AXL | FSE: HN8
ACN: 665 921 273
832 High St
Kew East VIC
Australia 3102
www.axelreelimited.com.au
info@axelreelimited.com.au
with 3x exaggeration
without vertical exaggeration
Figure 4 - Section with a vertical exaggeration of 3x, and the same section without vertical exaggeration of 3x.
The largest mineralised area in area A is the Central, and the Figure 7 presents four representative vertical
sections oriented in the northeast–southwest (NE–SW) direction, illustrating the geological and geophysical
characteristics of the Central Region from the northwest to the southeast extent of Area A.
ASX : AXL | FSE: HN8
ACN: 665 921 273
832 High St
Kew East VIC
Australia 3102
www.axelreelimited.com.au
info@axelreelimited.com.au
Figure 5 - Vertical sections in NE-SW representing the central area A from northwest to southeast.
A typical vertical sections through Area A East, which occupies a smaller region, is presented in figure 8
Figure 6 - Vertical section of area A East in N-S direction.
SRK considers that the data are reliable for this phase of the project, but recommends the following:
1. Review the logging criteria for improved definition of the USAP and LSAP contacts.
2. Conduct more diamond drilling to better define the contact of the fresh rock.
3. Implement in the core logging procedures the definition of type of protolithic rock in order to investigate
the contribution of gallium and REE concentration from the Caladão granite, Padre Paraíso charnockite,
and Faísca leucogranite.
ASX : AXL | FSE: HN8
ACN: 665 921 273
832 High St
Kew East VIC
Australia 3102
www.axelreelimited.com.au
info@axelreelimited.com.au
Variography
Geostatistical analyses were carried out using Leapfrog Edge® software to evaluate the grade variability
changes with distance and quantify the spatial continuity using the variography. The variograms were
evaluated to determine the optimum range and directions of mineral continuity, which were found to be
consistent with the structural orientation of the mineralised zones. The variographic ellipse orientation for
each domain was selected based on the interpreted domain geometry, which incorporated known
geological controls.
A “Normal Score” transformation was used to assist with defining and modelling the experimental
variograms. After fitting the variogram model in the Normal Score space, it was back-transformed the
variographic parameters to the database original space. The variables considered in the variographic
analysis were the total Rare Earth elements plus Yttrium (TREY), Galium (Ga).
Figure 7 - summarize variogram parameters used in the Caladão grade estimation.
Notes: It was applied a Normal Score Transformation before calculating the variography.
Grade Estimation Parameters
The Caladão Area A grade estimate was executed in Leapfrog Edge® software. Grade estimation was
controlled by the geological modelled domains. The composited samples within each domain were used to
estimate the block grades with equivalent domain coding. The variables estimated in the Caladão Area A
update model were cerium, dysprosium, erbium, europium, gallium, gadolinium, holmium, lanthanum,
lutetium, neodymium, praseodymium, samarium, terbium, thulium, yttrium, ytterbium, as well as MREO
and TREY metallurgical recoveries.
The Ordinary kriging (OK) interpolation method was used for local estimation, with nearest neighbor (NN)
and cube inverse distance (ID3) interpolation methods were used for the grade estimation validation
process.
The same estimation parameters and variography were used for all analytes.
Locally Varying Anisotropy
Share your feedback
Discover